MCW - Tips

TIPS - Your Mileage May Vary by Gary Guenther

1			Tip for a lathe mounted tool holder
2			Power drill trigger block
3			Power strip safety switch
4			Some thoughts on the use of CA glue
5			Considerations when using an ‘S’-shaped tool rest
6			Simple, effective, efficient sawbuck (sawhorse)
7			Tips Thanks to Cindy Drozda
8			Spindle Chatter
9			Leveling a hand drill
10			Adjustable lighting angle to aid smooth cuts
11			Links to educational articles by Steve Russell
12			Making small wooden balls with a sharpened pipe
13			Symposium Tips for First-Time Attendees
14			Rule of thumb: minimum shaft diameters for hollowing
15			Removing the heel of the bevel from your gouges
16			Tennis ball jam chuck
17			Four Tips from Jamie Donaldson
18			Using CA glue to move a center point
19			Stability of round-bottom bowls
20			Bradford Pear
21			Sanding without Sand
22			The Color Black
23			Steb Centers
24			A poor man’s coring tool – the Sorby Slicer
25			Blind Hollowing
26			Jam Chuck for Hollow Forms
27			PVC Jam Chuck
28			Paul Fennell Tools & Usage
29			Moisture Content and Wood Shrinkage
30			Photo Archive
31			Sanding Disc Storage
32			Paint Circles

Always use common sense. Things that work in one situation may not work in another. Follow all Safety Rules. If it feels wrong, it probably is; stop and rethink.

Montgomery County Woodturners